Ricoh A250 Service Manual page 859

Rev. 12/99
6.4 ROM HISTORY
6.4.1 ROM HISTORY – B305
Description of Modification
Corrections:
•
The user cannot initiate energy saver mode while in
the middle of a print job.
•
The language displayed is incorrect if any language
other than English has been set.
•
A software error occasionally occurs when the Enter
and Escape keys from the main printer menu display
are pushed simultaneously.
•
After the detection of a paper size mismatch, the error
LED turns off if the selected tray is opened and
closed.
•
If there is no paper remaining in the (selected) bypass
tray when beginning a print job, the correct paper size
is not displayed.
•
When the correct paper is not available to be fed
during a collating job, the corresponding display does
not appear on the screen.
•
Following an R-Jam, the number of copy sets printed
out is incorrect.
•
With PCL5e, three pages of a document are printed
out on one page (images overlapping).
•
Default display for backup mode is changed from
"Compressing" to "Processing".
•
When the tray selected through "tray lock" runs out of
paper, the machine begins feeding paper from
another tray without prompting the user. The pages
are then printed out.
•
Contrary to specifications, it is possible to set a
customized paper size when using the proof print
function.
•
When errors occur with the printer unit, SC error
messages are not displayed.
•
If the Interrupt button is pressed during a print job, the
job does not continue after attempting to resume
printing.
•
In sort mode, if an error occurs because the paper
being used does not fulfill the conditions of sort mode
(e.g. paper from the bypass tray, thick paper mode),
the entire job is printed out when the job is resumed,
including pages that have already been printed out.
•
Following the installation of the hard drive, even if the
printer is selected in function priority, copy jobs
receive first priority.
•
When an error occurs during a sort job, the
corresponding SC number is not displayed.
•
With a job using various paper sizes, after the
machine detects a paper mismatch and displays the
corresponding message, it is not possible to continue
the job.
Continued.....
SM
Firmware
Level
B3055280 B
See Note 1
6-5
ROM HISTORY
Serial Firmware
Number Version
Oct. 1999 1.2.0
Prod.
See
Note 2
A250