Ricoh A250 Service Manual page 498

BIT SWITCHES
2 Page separation
0: Enabled
1: Disabled
3 Printing the sample image
to on reports
4 Bit 4 Bit 3 Setting
0 0
0 1
1 0
1 1
5-6 Not used
7 Equalizing the reduction ratio
among separated pages
(Page Separation)
0: Enabled
1: Disabled
Printer Switch 0F
No FUNCTION
0 Smoothing feature
to Bit 1 Bit 0 Setting
1 0 0
0 1
1 0
1 1
2-7 Not used
A250
1: If all paper sizes in the machine require page
separation to print a received fax message, the
machine does not print the message (Substitute
Reception is used).
After a larger size of paper is set in a cassette, the
machine automatically prints the fax message.
"Same size" means the sample image is printed at
100%, even if page separation occurs.
User Parameter Switch 19 bit 4 must be set to "0"
The upper half
to enable this switch.
only
50% reduction
in sub-scan only
Same size
Not used
Do not change the settings.
0: When page separation has taken place, all the
pages are reduced with the same reduction ratio.
1: Only the last page is reduced to fit the selected
paper size when page separation has taken place.
Other pages are printed without reduction.
Disabled
Disabled
Enabled
Not used
COMMENTS
(0, 0) (0, 1): Disable smoothing if the machine
receives halftone images from other
manufacturers fax machines frequently.
Do not change the settings.
4-36 SM