Ricoh A250 Service Manual page 785

BULLETIN NUMBER: BULLETIN NUMBER: BULLETIN NUMBER: BULLETIN NUMBER:
APPLICABLE MODEL: : : : APPLICABLE MODEL
APPLICABLE MODEL APPLICABLE MODEL
GESTETNER – 3218/3215S GESTETNER – 3218/3215S GESTETNER – 3218/3215S GESTETNER – 3218/3215S
RICOH – AFICIO 180/150 RICOH – AFICIO 180/150 RICOH – AFICIO 180/150 RICOH – AFICIO 180/150
SAVIN – 9918DP/2015DP SAVIN – 9918DP/2015DP SAVIN – 9918DP/2015DP SAVIN – 9918DP/2015DP
SUBJECT: PLATEN COVER HINGE ASSEMBLY
GENERAL:
The lubricant applied to the Platen Cover Hinge Assembly has been changed from oil to grease. Grease is
being used because there were incidents were the oil had evaporated creating friction between the
Assembly and the Shaft. This would cause the mechanism to lock. The following part update is being
issued for all A250/B001 Parts Catalogs.
OLD PART NO. NEW PART NO.
A1931246
UNITS AFFECTED:
A250/B001 Serial Number cut-ins were not available at time of publication.
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
   
2000 RICOH Corporation. All rights reserved.
TECHNICAL SERVICE BULLETIN TECHNICAL SERVICE BULLETIN TECHNICAL SERVICE BULLETIN TECHNICAL SERVICE BULLETIN
A250/B001 - 028 A250/B001 - 028 A250/B001 - 028 A250/B001 - 028
A1931248 Platen Cover Hinge Assembly
DESCRIPTION
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
08/23/2000 08/23/2000 08/23/2000 08/23/2000
REFERENCE
QTY INT PAGE ITEM
1 1 9 7
CONTROL NO. 051ABW