Ricoh A250 Service Manual page 779

FIRMWARE HISTORY
A250 COPIER FIRMWARE MODIFICATION HISTORY
DESCRIPTION OF MODIFICATION
Continued Previous Page
•
After the operator exits either of the
following screens with the User Tools
key and starts a copy job, the first sheet
is printed out as the counter list.
•
System Settings
•
Key Operator Tools
•
Counter list printing
•
Copy Features
•
Key Operator Tools
•
Counter list printing
•
If a jam occurs while printing out a
counter report, the jam indication is
displayed but soon disappears. The
machine then returns to the counter
display screen. In addition, if the paper
end condition occurs while the paper is
being fed (after the start key is pressed),
the machine returns to the counter
display screen without properly
displaying "Set A4 (81/2 X 11) paper in
tray".
•
When a printer sort job and counter list
job overlap each other the counter list is
not printed out.
•
When the memory becomes full during a
copy job using the "combine" function,
the image being printed at the time
contains errors.
•
After setting several originals in the ADF
and scanning a fax cover sheet using
Auto Document, the operator exits the
mode but cannot make copies using the
ADF.
•
Abnormal image occurs when an A5
sideways original is enlarged to 8K
(tray 3) using Auto-Enlarge. A5
lengthwise prints out normally.
A250
FIRMWARE
LEVEL
A2505532 J October 1999
Production
7-16
Rev. 05/2000
SERIAL FIRMWARE
NUMBER VERSION
2.27
SM