Ricoh A250 Service Manual page 429

PRINTING FEATURES
Sub-Scan Reduction and Page Separation
Sub-scan Reduction Disabled
When Sub-scan Reduction is disabled, the received fax image is printed
unreduced.
If the image is longer than the paper length + 6 mm, the image is separated onto
two pages (see the top drawing below).
If the image is shorter than the paper length + 6 mm but longer than the paper
length - 4 mm, the part of the image after paper length - 4 mm will be lost (see the
bottom drawing below).
NOTE: The page separation threshold is adjustable between 0 and 15 mm (the
default is paper length + 6 mm). Refer to Printer Switch 03, bits 4 to 7 for
more details.
The 2 mm gaps at the leading and trailing edges depend on the leading
and trailing edge margin settings.
The 10 mm image duplication can be adjusted or disabled.
Paper length - 4 mm
Paper length - 14 mm
Paper length - 4 mm
Within
Paper length +6 mm
Not printed
A250
Received Image
Received Image
2-8
Printed Image
Duplicated (10 mm)
Printed Image
A891D505.WMF
SM