Ricoh A250 Service Manual page 146

PAPER TRAY UNIT (2 TRAYS) INSTALLATION
[A]
A860I164.WMF
8. Connect the cable [A] to the copier, as shown.
NOTE: There are cutouts on both sides of the connector. The left side has one
cutout, and the right side has two.
9. Re-install the cover removed in step 2 (1 screw).
10. Install the four brackets [B] (2 screws each).
11. Make a full size copy from the 2nd and 3rd trays. Then check that the side-to-
side registration is correct. If it is not, adjust the value (SP1-002).
A250
[B]
3-22
A860I007.WMF
SM