Ricoh A250 Service Manual page 851

BULLETIN NUMBER:
APPLICABLE MODEL:
GESTETNER – 3218/3215S
RICOH – AFICIO 180/150
SAVIN – 9918DP/2015DP
SUBJECT: PM MAINTENANCE COUNTER RESET
SYMPTOM:
The PM Maintenance Counter Alarm light is displayed. This is the symbol underneath the Wrench Alarm
light and to right of the Printer Alarm light. The symbol that is displayed is illustrated below.
CAUSE:
The PM Maintenance Alarm will display when the counter in SP 5-912 is reached. (Default is 100K)
SOLUTION:
Reset SP 7- 909 at each PM. To do this go into SP 7- 909 and select 1, press and hold the "Photo Mode"
key and then the "OK" key at the same time to reset the counter. The reset is successful if the beeper
sounds 5 times. Power the machine "OFF" then "ON".
   
Copyright 2003 RICOH Corporation. All rights reserved.
TECHNICAL SERVICE BULLETIN
A250/B001 - 054
PM Maintenance Alarm
Operation Panel
PM Maintenance Alarm
02/10/2003