Ricoh A250 Service Manual page 536

SERVICE RAM ADDRESSES
Bit 5: Use of A5 size paper for reports
(This switch is not printed on the user parameter list.)
0: Off, 1: On
Bits 6 and 7: Not used
6800D4(H) - User parameter switch 20 (SWUSR_14)
Bit 0: PC transmission mode
0: Direct Tx, 1: Memory Tx
Bit 1: Addition of fax TTI during PC memory transmission
0: Disabled, 1: Enabled
Bit 2: Checkered mark on printouts during PC printing
0: Disabled, 1: Enabled
Bits 3 and 4: Not used
Bit 5: Communication port for PC memory transmission
(This switch is not printed on the user parameter list.)
0: PSTN, 1: ISDN G4
Bits 6 and 7: Buffer threshold for PC direct transmission
Keep this bit at "0,0" in most cases.
(This switch is not printed on the user parameter list.)
Bit 7 Bit 6 setting
0 0
0 1
1 0
1 1
6800D5(H) - User parameter switch 21 (SWUSR_15)
Bit 0: PC fax reception
Bits 1 and 2: PC fax reception mode
Bit 2 Bit 1 Setting
0 0
0 1
1 0
1 1
Bit 3: Automatic reduction when the machine transfers data to the PC from the
machine. This switch is effective only for PC memory Tx.
(This switch is not printed on the user parameter list.)
0: Enabled, 1: Disabled
Bits 4 and 5: Scan density for the "Light" setting.
(This switch is effective only when a PC scanner application with the CMF-TWAIN
driver is used.)
Bit 5 Bit 4 Setting
0 0
0 1
1 0
1 1
A250
Minimum (default)
:
:
Maximum
0: Disabled, 1: Enabled
Direct rx
Memory rx
Not used
Memory rx and print on the fax machine
Level 1 (default)
Level 1
Level 2
Level 3
4-74 SM