Ricoh A250 Service Manual page 688

ROM HISTORY
B308 POSTSCRIPT OPTION FIRMWARE MODIFICATION HISTORY
DESCRIPTION OF MODIFICATION
Continued...
•
The print speed slows down during
continuos printing of a 1-page job.
** To activate this correction, it is
necessary to set Bit SW3, bit 2 to 1
(0=Disabled, 1=Enabled) and set Bit
SW3, bit 4 to 1 (DAZEL* support function
disabled). The correction will not be
effective if both of these switches are
enabled.
Corrects the following:
•
During RAM collate printing, the job
cannot be cancelled.
•
When the job is cancelled, the output
paper count is sent to the printer
controller (a side-effect of the previous
modification made for DAZEL
connection).
⇒
Corrects the following:
•
If the machine does not contain the driver
paper size when printing the 1st set of a
Collate job, and Job Reset is then
performed, the "Resetting Job..." display
does not clear.
•
Software modified to ignore a "DD" tag
on print data, preventing an undefined
error and allowing the job to go through.
Corrects the following:
•
Software modified so that it is possible to
perform jobs containing a mixture of PCL
and PS commands when printing directly
from a host application.
FIRMWARE
LEVEL
B3085280 F January '01
Production
B3085280 G December '01
Production
B3085280 H
Production
1-2
Rev. 11/2002
SERIAL FIRMWARE
NUMBER VERSION
1.2.6
1.2.7
May '02 1.2.8