Ricoh A250 Service Manual page 279

Blank Margin
NOTE: If the leading edge/side-to-side registration cannot be adjusted within the
specifications, adjust the blank margin for the leading/left side edge.
1. Check the trailing edge and blank margin for the right side edge. Adjust them
using the following SP modes.
Trailing edge
Right side edge
Leading edge
Left side edge
Main Scan Magnification
1. Print the Grid Pattern (SP5-902, No.5).
2. Check the magnification (the grid size should be 2.7 mm), and adjust the
magnification using SP2-998 if necessary. The specification is ±0.5%.
SM
COPY ADJUSTMENT PRINTING/SCANNING
SP mode Specification
SP2-101-2 More than 0.5 mm
SP2-101-4 More than 0.5 mm
2 ± 1.5 mm
SP2-101-1
2 ± 1.5 mm
SP2-101-3
A: Blank margin for the trailing edge
B: Blank margin for the right side edge
C: Blank margin for the leading edge
D: Blank margin for the left side edge
6-41
D
C
B
A250R513.WMF
A250R524.WMF
A
A250