Ricoh A250 Service Manual page 420

VIDEO DATA PATH
Direct reception
IBM Compatible
The machine transfers received image data directly to the host PC without storing it
into SAF memory.
NOTE: 1) If the host PC is not ready to receive a fax message, the machine
receives the message into SAF memory.
2) Even if the SAF memory is full, the machine starts fax reception.
However, the machine will not continue reception if the host computer is
not ready to receive a message.
3) The "Number of rings to answer" parameter in the PC fax application
must not exceed 4.
Memory reception
IBM Compatible
The machine receives a fax message in the SAF memory, then transfers data to
the host computer after the reception has finished. The machine prints the received
message after transferring data to the host if user parameter 21 – bit 2 is set to "1:
Print".
NOTE: 1) If an error occurs due to cable disconnection, the PC fax application
must be restarted to receive the message.
2) Memory reception is not possible when forwarding is enabled.
3) Manual reception from the PC fax application is not supported.
4) The "Number of rings to answer" parameter in the PC fax application
must not exceed 4.
A250
S A F
D C R
DIU
S A F
D C R
DIU
1-12
F C U
M o d e m N C U
A891V505.WMF
F C U
M o d e m N C U
A891V506.WMF
SM