Page 9
............. 7-20 7.6 ROLL FEED PAPER SKEW ADJUSTMENT ..... . . 7-21 A163...
Page 10
A251/A252 Service Manual The A251/A252 machines are based on the A163 copier. Only the differences from the base copier are described in the following pages. Therefore, this documentation should be treated as an insert version of the base copier’s service manual. It should always be utilized together with the base...
MECHANICAL COMPONENT 1.4 MECHANICAL COMPONENT 25 1 1st Original Feed Roller 14. Roll Feeder 1st Press Rollers 15. Paper Registration Rollers Copy Tray 16. Development Unit 17. Toner Cartridge Exit Rollers Fusing Exit Rollers 18. Manual Feed Table Hot Roller 19.
Page 14
SERVICE MANUAL – Insert Version – The B047/B048 machines are based on the A163/A251/A252 copiers. Only the differences from the base copier are described in the following pages. Therefore, this documentation should be treated as an insert version of the base copier’s service manual.
B047/B048 TABLE OF CONTENTS This manual describes new items for the J2SS-C3 (B047/B048). Please refer to the J2SS Mark II (A251/A252) manual for the descriptions marked with “*” in page column. OVERALL INFORMATION 1. OVERALL MACHINE INFORMATION ........1-1 1.1 SPECIFICATIONS..................1-1 1.2 PAPER PATH....................1-3 1.3 DRUM PROCESSES ................
Recovery from Toner End Condition.............2-5 Toner Density Sensor ................* 2.4.5 DEVELOPMENT BIAS ..............* Basic Concept..................* Manual Image Density Bias ..............* 2.4.6 TONER SUPPLY ................* 2.5 IMAGE TRANSFER AND PAPER SEPARATION ........* 2.5.1 PRE-TRANSFER LAMP (PTL) ............* 2.5.2 IMAGE TRANSFER.................
4.6.9 PAPER FEED.................. * 4.6.10 ROLL FEEDER................* 4.6.11 OTHERS..................* 4.6.12 AC DRIVE BOARD ...............4-29 Service Remark for 220 ~ 240 V Version..........4-29 Service Remarks for 120 V Version ............4-30 REPLACEMENT AND ADJUSTMENT 5. REPLACEMENT AND ADJUSTMENT........5-1 5.1 EXTERIOR COVERS ................* 5.1.1 LEFT SIDE COVER REMOVAL ............