Ricoh A250 Service Manual page 177

Rev. 03/2000
Mode No.
Class Class
1 and 2 3
⇒
9
10
1-908*
11
12
SM
Paper Tray Adj.
(M Size Setting - 1)
NOTE: The "T" after A4
and LT refer to length-
wise feeding direction.
Paper Tray Adj.
(N Size Back Time - 2)
Paper Tray Adj.
(S Size Back Time - 2)
Paper Tray Adj.
(M Size Back Time - 2)
SERVICE PROGRAM MODE
Function
Optional Paper Tray Unit Only:
Selects the middle size threshold for
the upper tray.
"0" means that this setting is not
used.
With the default settings, this SP is
not used in this machine.
The value must be larger than the
small size threshold (SP1-908-8).
The size used by SP1-908 is
determined by paper width. See
"Option - Paper Tray Unit" for details
on SP1-908.
Optional Paper Tray Unit Only:
If a middle size threshold is not
stored with SP1-908-18, this SP
adjusts the lower lift motor reverse
time for paper sizes larger than the
small size threshold set with
SP1-908-17.
If a middle size threshold is stored
with SP1-908-18, then this SP
adjusts the motor reverse time for
sizes larger than the middle size.
See "Option - Paper Tray Unit" for
details on SP1-908.
Optional Paper Tray Unit Only:
Adjusts the lower lift motor reverse
time for paper of the same size as or
smaller than the small size threshold
set with SP1-908-17.
See "Option - Paper Tray Unit" for
details on SP1-908.
Optional Paper Tray Unit Only:
Adjusts the lower lift motor reverse
time for paper sizes larger than the
small size threshold set with
SP1-908-17, up to and including the
middle size threshold set with
SP1-908-18.
If a middle size threshold is not
stored with SP1-908-18, this SP is
not used (with the default settings,
this SP is not used in this machine).
See "Option - Paper Tray Unit" for
details on SP1-908.
4-9
Settings
0: Non
(Not use)
1: HLT/A5
2: A4T
3: LG, LTT
4: DLT, LT
5: A3, A4
0 ~ 9000
1 ms/step
300 ms
0 ~ 9000
1 ms/step
600 ms
0 ~ 9000
1 ms/step
100 ms
A250