Ricoh A250 Service Manual page 200

SERVICE PROGRAM MODE
Mode No.
Class Class
1 and 2 3
ADF Registration
(Side-to-Side)
1
ADF Registration
(Leading Edge)
6-006* 2
ADF Registration
(Trailing Edge)
3
ADF Sub-scan
Magnification
6-007*
ADF Free Run
6-009
Stamp Position
Adjustment
6-010*
ADF APS Data Display
6-901
ADF Scanning Method
6-902*
ADF/Printer Free Run
6-910
A250
Function
Adjusts the side-to-side registration
in the ADF mode.
Use the key to toggle between +
and - before entering the value. The
specification is 2 ± 1.5 mm. See
"Replacement and Adjustment -
Copy Adjustment" for details.
Adjusts the leading edge registration
in the ADF mode.
Use the key to toggle between +
and - before entering the value. The
specification is 2 ± 1.5 mm. See
"Replacement and Adjustment -
Copy Adjustment" for details.
Adjusts the trailing edge erase
margin in the ADF mode.
Use the key to toggle between +
and - before entering the value. The
specification is more than 0.5 mm.
See "Replacement and Adjustment -
Copy Adjustment" for details.
Adjusts the magnification in the sub-
scan direction for ADF mode.
Use the key to toggle between +
and - before entering the value. See
"Replacement and Adjustment -
Copy Adjustment" for details.
Performs an ADF free run.
After selecting "1", press "OK" or the 
key twice to start this feature. F
Press the (Clear/Stop) key to
stop.
Adjusts the stamp position in the
sub-scan direction in fax mode.
Displays the status of the original
size sensors in the ADF.
See the "DF APS Original Sensor
Output Display"section.
Selects the original scanning method
in ADF mode.
Do not change the setting.
Performs both an ADF and a printer
free run.
 After selecting "1", press "OK" or the
key twice to start this feature. F
Press the (Clear/Stop) key to
stop.
4-32
Settings
–5.5 ~ +9.5
0.1 mm/step
0.0 mm
–5.0 ~ +5.0
0.1 mm/step
0.0 mm
–3.0 ~ +3.0
0.1 mm/step
0.0 mm
–0.9 ~ +0.9
0.1%/step
0.0%
0: No
1: Yes
–10 ~ +10
1 mm/step
0 mm
0: Doc
(original)
1: Mag (copy
paper size +
magnification)
0: No
1: Yes
SM