PAPER FEED
6.6.10 REGISTRATION ROLLER REMOVAL
Preparation
1) Remove the by-pass paper feed roller cover. (Refer to By-pass Paper Feed
Roller Removal, section 6.6.5.)
2) Remove the rear cover. (Refer to Exterior Removal, section 6.1.)
3) Remove the main motor and gearbox. (Refer to Main Motor and Gearbox
Removal, section 6.7.)
[C]
[B]
1. Remove the registration roller clutch [A] (1 snap ring).
2. Remove the bushing, as shown [B].
3. Replace the registration roller [C].
A250
A250R712.WMF
6-32
[A]
SM