Ricoh A250 Service Manual page 620

HARD DISK (HDD)
3.3 HARD DISK (HDD)
1. Remove the rear cover (5 screws).
2. Remove the left cover (1 screw).
[A]
G690I128.WMF
3. Remove the printer controller [A] (3 screws) and cover bracket [B] (2 screws).
4. Attach the hard disk drive [C] to either CN506 or CN507 on the controller, as
shown (2 screws removed in step 4, and 1 connector).
NOTE: The controller can have only one optional HDD.
5. Re-install the printer controller.
6. Turn on the machine and print the Printer Configuration Page ([User Tools] –
[Printer] – [List Print]). Verify that "Printer Hard Disk Drive" is listed.
A250
[B]
[C]
3-4
G690I180.WMF
SM