Service Program Mode Tables - Ricoh A250 Service Manual

SERVICE PROGRAM MODE
To input a value or setting for an SP mode
1. Enter the required program mode as explained above.
2. Enter the required setting using the numeric keys, then press the
"OK" key.
NOTE: 1) If you forget to press the
remains.
2) Change between "+" and "–" using the
required value.
3. Exit SP mode.

4.2.2 SERVICE PROGRAM MODE TABLES

NOTE: 1) In the Function column, comments are in italics .
2) In the Setting column, the default value is in bold letters.
3) An asterisk "*" after the mode number means that this mode is stored in
the NVRAM. If you do a RAM reset, all these SP modes will be return to
their factory settings.
4) SP4-915 to 4-941: When the SP mode name has a prefix of "P-", the
adjustment is only effective when the user selects an original type of
"Service Mode" (User Tools - General Features - 08. Image
Adjustment).
Mode No.
Class Class
1 and 2 3
Leading Edge Regist.
(Paper Tray Feed)
1
1-001*
Leading Edge Regist.
(By-pass Feed)
2
A250
key or "OK" key, the previous value
key before entering the
Function
Adjusts the printing leading edge
registration from the paper tray feed
using the Trimming Area Pattern
(SP5-902, No.10).
key to toggle between +
Use the
and - before entering the value. The
specification is 2 ± 1.5 mm. See
"Replacement and Adjustment -
Copy Adjustment" for details.
Adjusts the printing leading edge
registration from the by-pass feed
using the Trimming Area Pattern
(SP5-902, No.10).
Use the key to toggle between +
and - before entering the value. The
specification is 2 ± 1.5 mm. See
"Replacement and Adjustment -
Copy Adjustment" for details.
4-4
key or
Settings
+9 ~ –9
0.1 mm/step
+0.0 mm
+9 ~ –9
0.1 mm/step
+0.0 mm
SM