Ricoh A250 Service Manual page 826

Rev. 01/2001
B307 NIB OPTION FIRMWARE MODIFICATION HISTORY
DESCRIPTION OF MODIFICATION
Corrects the following:
•
The wording "Config Reference" has
been changed to "Riferim. Config" for the
Italian version of Web status.
•
The wording "Default Gateway Address"
has been changed to "Direcci. Gateway"
for the Spanish version of Web status.
•
A type of Cisco router caused a problem
in browsing the NIB in an AppleTalk
network. The cause of this was in the
Cisco router but the NIB firmware has
been modified to correct this.
Corrects the following:
•
PCL text filter support has been added.
• "RICOH" brand name has been deleted
from several functions and reports.
Corrects the following:
•
HTTP access has been improved when
multiple protocols are used at the same
time (e.g. telnet, IPP and HTTP).
⇒
Corrects the following:
•
Bi-directional communication of "diprint"
(using 9100 port of TCP/IP printing) is
supported (required for DAZEL system).
•
The "diprint direct [On/Off]" command
using telnet has been implemented for
supporting bi-directional communication
of diprint (required for DAZEL system).
PortNavi and Multidirect Print are not
supported if bi-directional communication
has been selected.
•
The spelling of the command "retern" in
the UNIX install shell has been corrected
to "return".
•
The DHCP of NetWare5 is supported.
•
The DHCP relay agent is supported. (This
has been confirmed only with Windows
NT 4.0 relay agent at this time.)
•
There may be some minor (character)
display errors on the LCD while the NIB
firmware is being upgraded. The
firmware has been modified to prevent
this.
SM
FIRMWARE SERIAL
LEVEL NUMBER
G6785839H October '99
Production
G6785839J November '99
Production
G6785839K April '00
Production
G6785839L October '00
Production
4-3
TROUBLESHOOTING
FIRMWARE
VERSION
3.9.8
4.0.0
4.0.2
4.06
A265/A267