Ricoh A250 Service Manual page 778

Rev. 05/2000
A250 COPIER FIRMWARE MODIFICATION HISTORY
DESCRIPTION OF MODIFICATION
•
(For Asia/Taiwan only):
•
The following is printed incorrectly on the
counter value report:
OK: <Counter
NG: Xounter
•
The default setting of the Printer Main
Magnification (SP2-998) has been
changed as follows.
NEW: 0.2 %
OLD: 0.0 %
•
Sometimes SC620 is not cleared when
the machine goes into sleep mode.
•
SC101 is sometimes displayed when the
ADF stamp is activated.
•
If the remaining amount of paper shifts to
the next lowest value while the counter
report is being printed out, the print job is
canceled.
•
When using 8k or 16k sized paper, the
logging data report (SMC) is printed out
in Japanese.
•
Both edges of the hot roller may be hot
when the machine has been running for
an extended time in thick paper mode.
•
When the Energy Saver Mode key is
pressed while a print job is being done in
the background, the machine will go into
Energy Saver Mode. However when the
operator releases the mode and returns
to the system settings or copy features
(both inside user tools), a message is
displayed asking the operator to wait and
the machine returns to the main copy
screen (although it is still in user tools).
The LED for the user tools key is lit, and
all indicators except the LCD report that
the machine is still in user tools.
SM
Continued Next Page
7-15
FIRMWARE HISTORY
FIRMWARE SERIAL
LEVEL NUMBER
A2505532 G July 1999
A2505532 H August 1999
Production
A2505532 J October 1999
Production
FIRMWARE
VERSION
2.19
2.21
2.27
A250