Ricoh A250 Service Manual page 194

SERVICE PROGRAM MODE
Class Class
1 and 2 3
4-942*
4-943*
4-944*
4-950*
5-001
5-103*
5-104*
5-106*
5-113*
⇒
5-116*
5-120*
A250
Mode No.
White Line Erase
Black Line Erase
Independent Dot Erase
Shading Mode Selection
All Indicators On
Auto Paper Tray Shift
A3/DLT Double Count
ADS Level Selection
Option Counter Type
Key Counter Up Timing
Opt. Counter Reset
Setting
Function
Selects whether or not white line
erase is done (without "Service
Mode").
See "Detailed Descriptions - Image
Processing" for details.
Selects the black line erase level
(without "Service Mode").
See "Detailed Descriptions - Image
Processing" for details.
Selects whether or not independent
dot erase is done (without "Service
Mode").
See "Detailed Descriptions - Image
Processing" for details.
Selects the scanner shading method in DF mode.
1. Stinger (Do the shading every page.)
2. ADAM (Do the shading at the time specified by
SP4-913.)
3. None (This is for the designer's test purposes. Do
not select this value.)
This is for the designer's test
purposes.
Do not change the value.
Turns on all indicators on the
operation panel.
Press "OK" or the ! key to check.
Press the " (Clear Modes) key to
exit this SP mode. The LCD blinks
all on and all off every 2 seconds.
Selects whether or not auto paper
tray shift is done.
Specifies whether the counter is
doubled for A3/11" x 17" paper.
If "Yes" is selected, the total counter
(mechanical counter) and the current
user code counter counts up twice
when A3/11" x 17" paper is used.
Selects the image density level that
is used in ADS mode.
Selects the optional counter type.
After installing the optional key
counter, this SP must be set to "1".
Determines whether the key counter
counts up at paper feed-in or at
paper exit.
This SP is for Japan only. Do not
change the value.
4-26
Rev. 12/99
Settings
0: Normal
1: Disable
0: Strong
1: Disable
2: Weak
0: Normal
1: Disable
0: No
1: Yes
0: No
1: Yes
1 ~ 7
1 notch/step
4
0: Non
1: Key
Counter
0: Feed In
1: Exit
0: Yes
1: Stand-by
2: Non
SM