9. OTHERS
9.1 Power Supply Unit Removal
1. Turn off the main switch.
2. Open the front cover, and remove the left inner cover (4 screws). Then, disconnect the 2P
white connector [A] from the power supply unit.
3. Remove the rear cover (2 screws) and the main board [B] (2 screws, leave connectors in-
serted). Then, remove the 16P white connector [C] from the power supply unit.
4. Pull out the transport handle [D] and remove the exit roller cover [E] (2 screws). Then,
remove the power supply unit [F]. (Be careful not to damage any connectors.)
5-73
31 August 1989