Ricoh A250 Service Manual page 646

ROM HISTORY
Description of Modification
(Continued from previous page)
•
When an error occurs during a sort job, the
corresponding SC number is not displayed.
•
With a job using various paper sizes, after the
machine detects a paper mismatch and displays the
corresponding message, it is not possible to continue
the job.
•
If a second printing job is selected while the first job is
being printed out (and the first job is then canceled),
the second job is printed out prematurely while
"ready" is being displayed.
•
When a paper mismatch is detected with a job using
various paper sizes, the alarm LED does not shut off.
•
On the config. page, a value is displayed for the size
of the paper inside a tray that has been removed from
the machine.
•
Although not always, there are cases where data
cannot be received when using AXIS.
•
During a sort job, the proper message indicating the
absence of paper is not displayed the second time the
tray runs out of paper (i.e. after the job has been reset
once).
•
Incorrect display of "Wingdings" font.
Corrections:
•
The printer controller can now determine if it is
installed in a A250 or B001.
•
If a Postscript driver job is cancelled midway through
the job, the image for the next job was not printed out
correctly.
•
"Waiting..." was displayed when an error occurred but
the machine does not return to normal operating
mode (Ready Status). The next job was not printed
out.
•
If two separate jobs of text less then 256 bytes were
sent from the network, the two jobs were printed out
simultaneously on the same page.
•
It was possible to print out the HDD Directory List
when there was no HDD or PS option installed.
Corrections:
•
Firmware modified so that it can be used with printer
controllers for China and Taiwan.
•
Firmware modified so that it will be compatible with
new HDD to be used in the printer controller.
NOTE: New HDD is identical in function to previous one.
NOTE 1: This can be viewed at SP Mode 7-801-4.
NOTE 2: This can be viewed on the Printer Configuration page.
A250
Firmware
Level
B3055280 B
B3055280 C
See Note 1
B3055280 D
6-6
Rev. 04/2000
Serial Firmware
Number Version
Oct. 1999 1.2.0
Prod.
Nov. 1999 1.2.7
Prod.
See
Note 2
Jan.2000 1.2.9
Prod.
SM