Ricoh A250 Service Manual page 667

Rev. 07/2001
B307 NIB OPTION FIRMWARE MODIFICATION HISTORY
DESCRIPTION OF MODIFICATION
Corrects the following:
•
The wording "Config Reference" has
been changed to "Riferim. Config" for the
Italian version of Web status.
•
The wording "Default Gateway Address"
has been changed to "Direcci. Gateway"
for the Spanish version of Web status.
•
A type of Cisco router caused a problem
in browsing the NIB in an AppleTalk
network. The cause of this was in the
Cisco router but the NIB firmware has
been modified to correct this.
Corrects the following:
•
PCL text filter support has been added.
• "RICOH" brand name has been deleted
from several functions and reports.
Corrects the following:
• HTTP access has been improved when
multiple protocols are used at the same
time (e.g. telnet, IPP and HTTP).
Corrects the following:
•
Bi-directional communication of
"diprint" (using 9100 port of TCP/IP
printing) is supported (required for
DAZEL system).
•
The "diprint direct [On/Off]" command
using telnet has been implemented
for supporting bi-directional
communication of diprint (required for
DAZEL system). PortNavi and
Multidirect Print are not supported if
bi-directional communication has
been selected.
•
The spelling of the command "retern"
in the UNIX install shell has been
corrected to "return".
•
The DHCP of NetWare5 is
supported.
•
The DHCP relay agent is supported.
(This has been confirmed only with
Windows NT 4.0 relay agent at this
time.)
•
There may be some minor
(character) display errors on the LCD
while the NIB firmware is being
upgraded. The firmware has been
modified to prevent this.
⇒
Corrects the following:
•
Classless InterDomain Routing (CIDR) is
supported.
•
DHCP of Solaris 2.6 is supported.
SM
TROUBLESHOOTING
FIRMWARE SERIAL
LEVEL NUMBER
G6785839H October '99
Production
G6785839J November '99
Production
G6785839K April '00
Production
G6785839L October '00
G6785839M February '01
4-3
FIRMWARE
VERSION
3.9.8
4.0.0
4.0.2
4.0.6
4.0.7
A250