Ricoh A250 Service Manual page 630

SERVICE MENU
4.3.3 POWER-ON DIAGNOSTICS ERROR DISPLAY
This displays the latest 10 error codes that were found during the power-on self-
test. Refer to chapter 6 (Troubleshooting) for details of the error codes.
1. Enter the Printer SP mode, and select "1. Service Menu".
2. Select "I. Diag. Error", then press [Enter].
3. Check the error codes on the LCD.
• [UP] [DOWN]: Move to the previous/next page.
4. Press [Cancel] to exit.
4.3.4 SERVICE SUMMARY
This prints a summary of all the controller settings.
1. Enter the Printer SP mode, and select "1. Service Menu".
2. Select "K. Service Print", then press [Enter].
3. Press [Enter] again to print the report.
Model Number / System Version / Unit Number
Lists the machine's Plug&Play name, controller firmware version, and the controller
part number.
Program List
Lists the firmware module version.
Bit Switch
List the current bit switch settings.
Note: The bit switches are not actually used at the moment.
Counter
List all the counters in the controller.
NOTE: Some counters listed in the report are not actually used.
For example, "Duplex Page Count" is listed, but not available.
Exception Information
Lists CPU exception error information. Designer use only.
System Logging / System Logging 2
Lists internal log data. Designer use only.
Option
Lists all the installed optional components.
A250 4-4 SM