Ricoh A250 Service Manual page 788

ROM HISTORY
⇒
1. When the Energy Saver Mode key is pressed while a
print job is being done in the background, the
machine will go into Energy Saver Mode. However
when the operator releases the mode and returns to
the system settings or copy features (both inside
user tools), a message is displayed asking the
operator to wait and the machine returns to the main
copy screen (although it is still in user tools). The
LED for the user tools key is lit, and all indicators
except the LCD report that the machine is still in user
tools.
2. After the operator exits either of the following
screens with the User Tools key and starts a copy
job, the first sheet is printed out as the counter list.
• System Settings : Key Operator Tools : Counter list
printing
• Copy Features : Key Operator Tools : Counter list
printing
3. If a jam occurs while printing out a counter report,
the jam indication is displayed but soon disappears.
The machine then returns to the counter display
screen. In addition, if the paper end condition occurs
while the paper is being fed (after the start key is
pressed), the machine returns to the counter display
screen without properly displaying "Set A4 (81/2 X
11) paper in tray".
4. When a printer sort job and counter list job overlap
each other the counter list is not printed out.
5. When the memory becomes full during a copy job
using the "combine" function, the image being
printed at that time will contain errors.
6. After setting several originals in the ADF and
scanning a fax cover sheet using Auto Document,
the operator exits the mode but cannot make copies
using the ADF.
7. Abnormal image occurs when an A5 sideways
original is enlarged to 8K (tray 3) using Auto-
Enlarge. A5 lengthwise prints out normally.
A250
Description (P/N A2505532)
4-62
Rev. 09/2000
Ver. Serial #
2.27 J Oct. '99 Prod.
SM