Ricoh A250 Service Manual page 635

Error Messages
Message
Erasing Failed ADRS:
xxxxxx
Writing Failed ADRS:
xxxxxx
Memory Insufficient
Melting Failed
DIMM – installable
program cannot find
CRC error: Please
retry install
NIB board is not
equipped
Initialization failed
Download mode is
disabled
SM
Description
Test the on-board flash ROM and
retry the download.
Reset the controller and try again.
The firmware file used to program
the card may be damaged. Get a
new firmware file and store it on
the card.
Wrong type of firmware on the
card.
The firmware file used to program
the card may be damaged. Get a
new firmware file and store it on
the card.
Install a NIB on the controller, then
try again.
Retry the download.
Retry the download.
4-9
SERVICE TABLES
Controller NIB PS3
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes No
No No Yes
No No Yes
No Yes No
No Yes No
No Yes No
A250