C-17D Consultation Hold - All Calls - D Term - NEC NEAX 2400 ICS Features Manual

Hide thumbs Also See for NEAX 2400 ICS:
Table of Contents

Advertisement

C-17D
General Description
This feature permits a D
any Intra-office calls, while originating a call to another station within the system.
Operating Procedure
To hold original call and place second call from a D
1.
Press the "XFR" key; receive Special Dial Tone.
2.
The original call is held.
3.
Dial the second station number; receive Ringback Tone.
4.
The second station answers; the CONSULTATION HOLD state has been entered.
To return to the original call from a D
1.
In any of the following cases, the calling station can return to the original call by pressing the
"XFR" key:
a.) Second station called for consultation is busy.
b.) Calling station cannot gain access to the second station because of a restriction or some
other reason.
2.
If the second station hangs up, the calling station will automatically be returned to the original
call.
3.
If the second station stays on, pressing the "XFR" key returns the original call to the D
the second call is being held.
By pressing the "CNF" key, a THREE-WAY CALL [T-2] will be initiated.
Service Conditions
1.
When TRUNK-TO-TRUNK CONNECTION [T-10] is provided with the system, an outgoing public
network or TIE Line call may be made by the station user.
2.
With outgoing calls, this feature may be activated only after 18 seconds have elapsed since the
last digit was dialed.
3.
CALL PICKUP-GROUP [C-7] is available on CONSULTATION HOLD.
Interactions
1.
This feature is denied whenever the destination telephone set is engaged in any state other than
a simple 2-party connection.
2.
CONSULTATION HOLD-ALL CALLS must always be made available when service features
require switchhook flashing.
3.
Indexes 156 and 157 also are used for SMDR, establishing an arbitrary connection timing.
4.
If a party is involved in a CONSULTATION HOLD-ALL CALLS state or in an established THREE-
WAY CALLING [T-2] connection, attempts to override the connection are denied. These features
are:
EXECUTIVE RIGHT-OF-WAY
CALL WAITING - TERMINATE
BUSY VERIFICATION
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Consultation Hold - All Calls - D
Consultation Hold - All Calls - D
term
station user to hold any incoming or outgoing public network or TIE Line, or
term
:
term
term
:
[E-1]
[C-12]
[B-3]
C-17D
term
term
while
Page 141

Advertisement

Table of Contents
loading

Table of Contents