C-11D Call Transfer - All Calls - D Term - NEC NEAX 2400 ICS Features Manual

C-11D
General Description
This feature permits a D
Operating Procedure
To transfer a call in progress:
1. While connected with the first party, press the "XFR" key; receive Special Dial Tone.
2. Dial the third party; receive Ringback Tone.
3. At this point, the station user can either wait and announce the call or hang up before the transfer
is completed. The LCD display for an announced transfer will be:
term
D Series E
The LCD for an unannounced transfer will be:
term
D Series E
Service Conditions
1. The station performing the CALL TRANSFER - ALL CALLS can disconnect before the called
party answers. If the called station does not answer within the predetermined time, ringing signal
is returned to the transferring station. See VARIABLE TIMING PARAMETERS
other selectable timing choices.
2. In the case of outgoing calls (no answer supervision), this feature may be activated only after 18
seconds have elapsed since the last digit dialed.
3. Outgoing calls with answer supervision may be transferred immediately after call is answered
(no time delay).
4. The THREE-WAY CALLING [T-2] feature can comprise not more than three parties on one
connection. The three parties connected can be as follows:
a.) three stations
b.) two stations and one trunk
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Call Transfer - All Calls - D
Call Transfer - All Calls - D
term
user to transfer incoming or outgoing calls without Attendant assistance.
XFR
(Time Display)
TRANSFER
(Time Display)
Transferring Party
XFR XXXX
(Time Display)
TRANSFER XXXX
(Time Display)
term
Transferred Party
XXXX
XXXX
Transferred Party
XXXX
XXXX
C-11D
term
[V-1] feature for
Page 129