Speed Calling Override - System - NEC NEAX 2400 ICS Features Manual

Hide thumbs Also See for NEAX 2400 ICS:
Table of Contents

Advertisement

S-61
S-61
General Description
This feature allows numbers programmed for SPEED CALLING to be available to stations on a system-
wide basis, determined by Service Feature Class (SFC). For example, SPEED CALLING-SYSTEM [S-3]
numbers, available to stations that are not restricted, can be made available to stations that are restricted.
Operating Procedure
To operate:
1.
Lift the handset (includes SPKR key operation on D
(Series 6100 software enhancement) Dial the SPEED CALLING-SYSTEM [S-3] access code
2.
(maximum three digits).
3.
(Series 6100 software enhancement) Dial the abbreviated code (maximum four digits).
4.
If the station is allowed this call, the call is completed; if not, the station will hear a Reorder Tone.
term
To operate from a D
1.
Press "LNR/SPD" key; receive Dial Tone. The LCD displays:
term
D
Series E
2.
Press the desired call code.
3.
If the station is allowed this call, the call is completed; if not, the station will hear a Reorder Tone.
Service Conditions
1.
This feature cannot be used on an outgoing call which uses OUTGOING TRUNK QUEUING
[Q-2].
2.
This service can be used in combination with CONSECUTIVE SPEED CALLING - SYSTEM
[C-62].
3.
This feature cannot be used in MFC signaling.
4.
This feature cannot be used if the calling station is holding another line.
5.
This Attendant Console cannot use this feature.
6.
SPEED CALLING-SYSTEM [S-3] must first be provided.
Interactions
1.
SPEED CALLING-SYSTEM [S-3] must first be provided.
2.
FORCED ACCOUNT CODES [F-7] and AUTHORIZATION CODES [A-20] cannot be
programmed for use via SPEED CALLING-SYSTEM [S-3].
3.
Pauses are programmable from the MAT, using the "P" key. Pauses consume one digit of the 24
digits available. A pause lasts for 2.8 seconds.
Page 486

Speed Calling Override - System

Speed Calling Override - System
:
LNR [*] / SPEED [_ _]
(Time Display)
LNR [*] / SPEED [_ _]
(Time Display)
term
). Listen for Dial Tone.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4

Advertisement

Table of Contents
loading

Table of Contents