Putting Calls On Hold; Private Conversation; Disconnecting A Party - NEC 535 Manual

If adding a call to conference calling is unsuccessful, the failure screen displays briefly and the phone returns to the previous
status.

Putting Calls on Hold

*
Press Softkey 1 to place both calls on hold.
Press 2, 1 and SEND to place the first call on hold. Press 2, 2, and SEND to place the second call on hold.

Private Conversation

During a multi-party call, you can select one participant for a private conversation while the other participants continue the
conference call.
*
Highlight the participant.
Press MENU (Options Menu) and 6 to briefly display the busy screen for Private conversation and begin the private
conversation.
Press END to end a private conversation and the call.
To end the private conversation and add the party back to the multi-party call:
*
Press MENU (Options Menu) and 6. This combines the two calls back into a single multi-party call and all members are
active.

Disconnecting a Party

During a multi-party call, you can disconnect one of the participants and continue the call with remaining participants from the Call
in progress screen.
*
Highlight the participant to disconnect.
Press MENU (Options Menu) and 9 to disconnect the participant from the conference call or press 1, 2, and SEND to
disconnect the second call or 1, 1, and SEND to disconnect the first call.
O
Two calls are on the phone: the multi-party call and the active single call of the private conversation. The members of the
multi-party call can still speak to each other on the one call while the private conversation is the other call.
O
Press END or Softkey 1 to end both calls.
37