Table of Contents
Advertisement
A-53
Interactions (cont'd)
6.
The Attendant Console can dial Priority Page access code and release a station.
7.
When disconnecting from a Paging trunk, the trunk becomes idle immediately.
8.
ALL-ZONE PAGING is not possible from CONSULTATION HOLD [C-17].
9.
CALL HOLD [C-6]: A Paging trunk cannot be placed on Call Hold.
term
10. The D
LCD display indicates BUSY when the Paging trunk is Busy. Reorder tone is returned.
11. If Priority Page is to be used with ALL-ZONE PAGING in ARTD, CDN 6:TCL must be assigned
as Data 8, Page with Ringback Tone. SYS1, Index 73 affects the operation of Page routes
assigned Page with Ringback Tone. Therefore, if the Priority Page is used with ALL-ZONE
PAGING, then MEET-ME PAGING [M-1, 11] and PAGING TRANSFER [P-10] are not available
to the system.
12. Priority Page access will not disconnect an Attendant Console engaged in a Paging trunk
connection.
Page 38
All Zone Paging
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Advertisement
Table of Contents
