Table of Contents
Advertisement
C-6D
Operating Procedure (cont'd)
3.
Dial CALL HOLD [C-6] access code.
4.
Press SPEED CALLING - ONE TOUCH [S-26] key. The LCD displays:
term
D
Series E
5.
This key may now be used to access the CALL HOLD - D
6.
When engaged in a conversation, press the SPEED CALLING - ONE TOUCH [S-26] key with
the stored CALL HOLD - D
7.
Dial Tone is restored to the phone, and user is free to make another call.
term
To operate a D
via the FLASH BUTTON [F-3D]:
1.
When engaged in a conversation, press the programmable feature/line key programmed as a
FLASH BUTTON [F-3D]. The LCD will display:
term
D
Series E
2.
Dial the CALL HOLD [C-6] access code; the LCD goes blank and DT is restored to the user.
Service Conditions
1.
Lines freed through use of this feature may also be used for answering incoming calls via the
CALL PICKUP - GROUP [C-7] or TRUNK ANSWER FROM ANY STATION [T-8] features.
2.
If the controlling station user does not dial any further digits after the HOLD code, station set will
enter the LINE LOCKOUT [L-3] mode after a preset time-out period.
3.
Calls will remain on HOLD until the controlling station user either replaces the handset, causing
the held call to ring back, or will press the "XFR" key or flash button and redial the HOLD code
to return to the original call.
4.
Only one call per station may be held at one time, and a held call cannot be added to another
party as in THREE-WAY CALLING [T-2].
5.
Stations may be assigned this feature via CLASS OF SERVICE - INDIVIDUAL [C-15]
programming in System Data.
6.
There is no limitation to the number of stations that may access this feature simultaneously.
7.
Kind of service indication on the LCD display is allowed or denied via System Data programming.
8.
When a station has a Camped-On call, activating the CALL HOLD - D
station connecting to the Camped-On party.
Page 116
Call Hold - D
SPD SET
(Time Display)
SPEED SET
(Time Display)
term
access code.
XFR
(Time Display)
TRANSFER
(Time Display)
term
term
feature.
NEAX2400 ICS Business Features and Specifications
term
function results in the
NDA-24143, Issue 4
Advertisement
Table of Contents
