NEC NEAX 2400 ICS Features Manual page 367

Hide thumbs Also See for NEAX 2400 ICS:
Table of Contents

Advertisement

Service Conditions (cont'd)
b.) The Attendant Console key that lights when a call is forwarded to the console depends
on the forwarding status of the originally called station (except in case c). The following
table shows the key that will light (e.g., if the forwarding status of the originally called
station is CALL FORWARDING - BUSY LINE [C-2], and the call is from a station, then
the "BUSY" key will light).
Call from station
Call from trunk
c.) If the call is forwarded by CALL FORWARDING - DON'T ANSWER [C-3] at any point in
a forward sequence, the "NANS" key on the Attendant Console will light, even if the call
status of the originally called station is CALL FORWARDING - ALL CALLS or CALL
FORWARDING - BUSY LINE.
7.
Forwarding to a D
a.) The calling D
number of the station being rung on the right. The display on the ringing D
the number of the originally called station on the left, and the number of the calling
station on the right.
b.) The forwarding status of the originally called station is shown on the far left of each
term
D
's display: FDB for CALL FORWARDING - BUSY LINE or FDA for CALL
FORWARDING - ALL CALLS.
8.
UCD Groups:
a.) If the destination of a CALL FORWARDING - DON'T ANSWER [C-3] is a UCD group
control station, the call will be forwarded into the UCD group.
b.) If the destination of a CALL FORWARDING - BUSY LINE [C-2] or a CALL
FORWARDING - ALL CALLS [C-5] forward is a UCD group control station, the call will
be forwarded into the UCD group.
9.
Hunting:
a.) If the final destination station of a MULTIPLE CALL FORWARDING-DON'T ANSWER is
a controlling station in a STATION HUNTING-TERMINAL [S-9] or a member station of a
STATION HUNTING-CIRCULAR [S-7], then hunting will take place if that destination
station is busy.
10. An Applications Floppy Disk is needed to permit the CALL FORWARDING-DON'T ANSWER [C-
3] call to be transferred up to five times by CALL FORWARDING-ALL CALLS [C-5] and CALL
FORWARDING-BUSY LINE [C-2].
Interactions
1.
If access codes for CALL FORWARDING-BUSY LINE [C-2] and CALL FORWARDING-DON'T
ANSWER [C-3] are the same, only one key needs to be assigned in AKYD, and only one access
code needs to be assigned in ASPA.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Multiple Call Forwarding - Don't Answer
Forwarding Status Of Originally Called Station
Call Forward - All
Calls
ATND
Depends on trunk
class
term
:
term
's display will show the number of the called station on the left, and the
Call Forward -
Busy
BUSY
BUSY
M-25
Call Forward -
Don't Answer
NANS
NANS
term
will show
Page 337

Advertisement

Table of Contents
loading

Table of Contents