Table of Contents
Advertisement
D-5
D-5
General Description
This feature provides the Attendant with a visual display (via the ATTENDANT CONSOLE [A-3]) of the
station number, its Trunk Route Restriction, CLASS OF SERVICE - INDIVIDUAL [C-15] and TENANT [T-
12] number during Attendant-to-station connection.
Operating Procedure
The DIGITAL DISPLAY STATION is automatically activated whenever the Attendant answers an
incoming call from a station, or originates a call to a station.
Service Conditions
1.
The station number is displayed on the right side of the ATTENDANT CONSOLE [A-3] digital
display. Trunk Route Restriction CLASS OF SERVICE - INDIVIDUAL [C-15] and TENANT [T-
12] number are simultaneously displayed on the left. See Example 1 below.
Example 1:
Single-digit Trunk Route Restriction CLASS OF SERVICE - INDIVIDUAL [C-15] and TENANT
[T-12] number; 4-digit station number.
TENANT NUMBER
2.
If the Trunk Route Restriction Class and/or TENANT [T-12] number are two digits, only the
station number may be displayed. Refer to Example 2.
3.
If a station dialed by the Attendant is busy or in the LINE LOCKOUT [L-3] mode, only the station
number will be displayed.
4.
The ATTENDANT CONSOLE [A-3] digital display is limited to a 6-digit numeric display. Since
the Class of Service and trunk routing display is in numeric form, a list must be provided to the
Attendant explaining the restrictions of each Class of Service number and trunk identification
number.
5.
CALL FORWARDING [C-2, 3, 5]: When this feature is activated by (or for) the called station, the
terminating station number is indicated on the digital display rather than the called station
number when the Attendant extends a call.
6.
STATION HUNTING [S-7, 8, 9]: When this feature is applied because of the called station being
busy and the station belonging to a hunt group, the terminating station number is indicated on
the digital display rather than the called station number when the Attendant extends a call.
7.
In the case of a 3 or 4-digit station-to-station numbering plan:
a.) 1 digit is used to identify the tenant (in the case where 2 digits are required for Class of
Service, the tenant number is not identified).
b.) 1 or 2 digits are used to identify the station Class of Service.
c.) 4 digits are used to display the station number.
Page 194
Digital Display - Station
Digital Display - Station
ROUTE RESTRICTION CLASS
STATION NUMBER
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Advertisement
Table of Contents
