Table of Contents
Advertisement
R-49
R-49
General Description
This feature allows the D
Operating Procedure
To set this service:
1.
Press the Ringer Mute key.
2.
The key lamp is lit and "RING OFF" is displayed on the LCD on the D
To cancel this service:
1.
Press the Ringer Mute key again.
2.
The key lamp goes off and "RING ON" is displayed on the LCD on the D
Service Conditions
1.
Ringer Mute key (FKY = 117) must be assigned to a feature key/Soft key by the AKYD command.
2.
The initialization of system or ELC card makes this service cancelled.
3.
Recall ringing is not heard while this feature is set.
4.
This service and DO NOT DISTURB-D
Therefore, when these service are set on the same D
by one.
5.
No matter how the incoming call terminates, this service is valid.
6.
When this service is set while the D
Interactions
The following issues of firmware equipped on the circuit cards are required for this service:
Circuit Card
PA-16ELCH-E
PA-16ELCH-F
PA-DAIA-DD (2M AMI)
PA-2DAID-DD (2M AMI)
PA-DAIC-DD (1.5M AMI)
Page 446
Ringer Mute
Ringer Mute
(Series 6200 software feature)
term
user to stop ringing by pressing the feature key on the D
term
SP-3124 16ELCD PROG-D
SP-3125 16ELCD PROG-TD
SP-3126 2WDLI PROG-D
SP-3126 2WDLI PROG-D
SP-3126 2WDLI PROG-D
term
[D-11D] are independent functions from each other.
term
, these two have to be cancelled one
is ringing, the ringing stops.
Firmware
NEAX2400 ICS Business Features and Specifications
term
.
term
for three seconds.
term
for three seconds.
Issue
1 or later
1 or later
1 or later
1 or later
1 or later
NDA-24143, Issue 4
Advertisement
Table of Contents
