Table of Contents
Advertisement
Service Conditions (cont'd)
10. For the stations that belong to the following service groups, this service is available only for those
stations belonging to the same group.
CALL PICKUP
CALL PARK
STATION HUNTING - CIRCULAR
STATION HUNTING - TERMINAL
UCD
Note:
In case of STATION HUNTING - SECRETARIAL [S-8], the function as the secretarial station does not swap
even when the station swaps. (The secretary station is not considered as a member of the hunt group.)
11. When following station activates this service, its destination station is not swapped.
a.) Station where following services are set:
• CALL FORWARDING - BUSY LINE set by the system
• CALL FORWARDING - DON'T ANSWER set by the system
• CALL FORWARDING - INTERCEPT/ANNOUNCEMENT [C-25]
b.) Predetermined station for HOTLINE [H-1]
c.) Predetermined station for OFF-HOOK ALARM [O-6]
d.) DIRECT-IN TERMINATION (DIT) [D-7] station
term
12. If D
has individual terminal data assigned, this service is available for D
terminal data.
13. This service is not available for:
term
a.) D
with "OAI" service key.
b.) ACD agent console and supervisory console.
term
c.) D
with CALL WAITING LAMP - UCD [C-76].
14. This feature cannot be activated between D
used, there may be cases where the incoming call cannot be answered or some services cannot
be activated, due to lack of line/function keys. In this case, the data can be restored by activating
the service again or by exchanging the terminal sets.
15. When activating this service between D
the terminals cannot be exchanged. (There may be some inconvenience if number of Speed
Calling keys, etc. differ between the terminals.)
16. When activating this service, swap of the Speed Calling - One Touch key data start upon
replacement of the handset. It takes approximately 42 seconds for the Speed Calling key data
to swap, and during this time, Follow Phone service and Speed Calling - One Touch operations
are restricted.
17. After this service is activated, and if "DM load reset" is activated before the data is backed up to
the hard disk, the stations return to the previous status. However, this is not the case with the
Speed Calling - One Touch keys.
18. The DSS Console data does not swap. The My Line of the connected D
this case, reassignment of DSS data and cabling will be necessary. The above is the same when
using DSS as an Add-On Module.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Follow Phone
[C-7, 30]
[C-29]
[S-7]
[S-9]
[U-1]
term
s of different types. When different D
term
Series II and Series III, the service is allowed, but
F-31
term
s with identical
term
s are
term
may swap, but in
Page 259
Advertisement
Table of Contents
