Table of Contents
Advertisement
F-3D
F-3D
General Description
This feature provides for a D
BUTTON. The FLASH BUTTON will function in the manner a switchhook flash does for a single-line set.
Operating Procedure
When activating features common to both D
1.
Press the FLASH BUTTON to receive Special Dial Tone,
2.
Dial the access code of the desired feature.
Service Conditions
1.
When using the FLASH BUTTON, the feature will not be activated again until digits are dialed.
For example, if a transfer is attempted via the FLASH BUTTON, the call cannot be retrieved by
pressing the FLASH BUTTON with dialed digits. To retrieve the transfer attempt, press the "XFR"
key.
2.
The FLASH BUTTON is optional. Its various features will be explained in this document.
Interactions
1.
A FLASH BUTTON feature provides switchhook flash capabilities to a D
Index (CI) of Busy. See ASPA. The features in which a FLASH key are used include CALL BACK
[C-1] and OUTGOING TRUNK QUEUING [O-2]. The FLASH BUTTON is usually required with
the 4-button D
2.
Refer to ASYD, System Data 3, Index 2 for programming the characteristics of a switchhook
flash (Hooking (H)).
Page 248
Flash Button - D
Flash Button - D
term
set to program one of the line/feature keys to function as a FLASH
term
term
.
term
term
and single-line sets:
NEAX2400 ICS Business Features and Specifications
term
with a Connection
NDA-24143, Issue 4
Advertisement
Table of Contents
