Table of Contents
Advertisement
N-1
Interactions (cont'd)
5.
When the NIGHT CONNECTION - FLEXIBLE [N-2] feature is provided, assignments can be
made by the ATTENDANT CONSOLE [A-3] or NIGHT CONNECTION - FIXED station by use of
the CALL FORWARDING - ALL CALLS [C-5] feature.
6.
CALL FORWARDING - BUSY LINE/DON'T ANSWER [C-2, 3]: A Night station user can activate
the CALL FORWARDING - BUSY LINE/DON'T ANSWER [C-2, 3] feature if available to the user.
A call ringing at an idle NIGHT CONNECTION - FIXED station rings for 30 seconds before
forwarding. A call forwarded from a busy NIGHT CONNECTION - FIXED station rings normally
at the designated station. A station-to-Attendant call cannot be forwarded to a NIGHT
CONNECTION - FIXED station. An incoming trunk call forwarded from an idle unanswered
NIGHT CONNECTION - FIXED station alerts the designated station with distinctive ringing.
7.
CALL WAITING [C-12, 13]: Call Waiting tones are not directed to a busy NIGHT CONNECTION
- FIXED. When the Night station user goes on-hook, ringing is returned if a call is waiting.
8.
CALL TRANSFER - ALL CALLS [C-11]: When the NIGHT CONNECTION feature is active, the
CALL TRANSFER - ALL CALLS [C-11] feature is always enabled, regardless of the Class of
Service of the station assigned to NIGHT CONNECTION - FIXED.
9.
STATION MESSAGE DETAIL RECORDING (SMDR) [S-10]: The SMDR records contain Night
service calls. The SMDR call record includes the station number answering the call.
10. Incoming Restricted Line: When NIGHT CONNECTION - FIXED or FLEXIBLE [N-2] is active,
the line Class of Service restrictions can be automatically changed when the system is in the
Night mode, to allow a station normally restricted during the day to receive incoming calls.
11. NIGHT CONNECTION - FIXED: Arrangements are provided to route calls normally directed to
the Attendant, to a preselected station line within the system when Night service is activated. In
addition, incoming calls from specific non-Direct Inward Dialing (DID) exchange network trunks
can be arranged to route to specific station lines. The routings are provided on a fixed basis via
the MAT [M-18]. TRUNK ANSWER FROM ANY STATION (TAS) [T-8], when available, may also
be provided for Night calls not assigned to Night stations. Assignments can be made per
incoming trunk.
12. When CALL FORWARDING - ALL CALLS [C-5] or CALL FORWARDING - BUSY LINE/DON'T
ANSWER [C-2, 3] is provided, and the station is busy, Call Forwarding is implemented on the
station line. If the station is in a HUNT GROUP [S-7, 8, 9], call forwarding will take place prior to
the station hunting feature or UCD [U-1].
13. CALL QUEUING [C-9]: Incoming trunk calls to the Night Connection station will queue on a First
In/First Out basis.
14. CLASS OF SERVICE - INDIVIDUAL [C-15]: Night Connection station's class of service should
be constructed to allow access to the routes and service features required to complete the tasks
of the Night Connection station.
15. DIRECT INWARD DIALING [D-8]: Only Listed Directory Number DID calls (as assigned in the
ALDN command) will be directed to the Night Connection station. All DID trunks must be
programmed to the Night Connection station via the ACSI command.
16. When system is in the Night mode of operation, incoming calls are directed in the following order:
NIGHT CONNECTION - FLEXIBLE
NIGHT CONNECTION - FIXED
TAS
Page 372
Night Connection - Fixed
[N-2]
[T-8]
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Advertisement
Table of Contents
