NEC NEAX 2400 ICS Features Manual page 123

Service Conditions (cont'd)
10. The display of an intermediate station on a D
according to system data. This assignment is done on a system basis. The LCD displays:
term
D Series E
11. CALL FORWARDING - BUSY LINE - D
12. The operator answering a forwarded call can identify the called number on the ATTENDANT
CONSOLE [A-3] display.
13. If the called station is the pilot of a UCD [U-1] group and activates CALL FORWARDING - BUSY
term
LINE - D , the calling station will queue to the UCD [U-1] group and will not CALL FORWARD.
14. If a calling station, ATTENDANT CONSOLE [A-3], or trunk receives Busy Tone after setting
CALL FORWARDING - BUSY LINE [C-2] and activates EXECUTIVE RIGHT-OF-WAY [E-1],
CALL WAITING - ORIGINATING [C-31], CALL WAITING - TERMINATING [C-12], or BUSY
VERIFICATION [B-3], these services will be activated to the calling station.
15. If all the stations in the terminating Station Hunt Group are busy, the forwarding call will hear
Busy Tone and will not return to the calling party's Hunting Group.
16. When MULTIPLE CALL FORWARDING - BUSY LINE [M-24] service is activated, hunting will be
performed at the last destination of the forwarded call, even though the multiple jumped stations
are in a Hunt Group.
17. When the pilot station of a Hunt Group activates CALL FORWARDING - BUSY LINE - D
a station (not a member of a Hunt Group) and system parameters specify that Call Hunting will
be activated at the forwarded station, the NEAX2400 ICS will send Busy Tone if the forwarded
station is busy. If the system parameters specify hunting at the forwarding station and the
forwarded station is busy, the call will hunt in the forwarding station's Hunt Group.
18. When a station sets CALL FORWARDING - ALL CALLS [C-5] to a pilot in a Hunt Group, and the
pilot activates CALL FORWARDING - BUSY LINE to another station, if the system parameters
define the call to hunt to the forwarded-to Station Hunt Group and all stations are busy, the
calling party will hunt at the called station's Hunt Group. If system parameters assign the call to
hunt to the forwarding Station Hunt Group and all stations are busy, the calling party will then
hunt to the forwarding station's Hunt Group.
19. This service feature can be restricted according to the service restriction class of the D
Line. Even after the CALL FORWARDING - BUSY LINE [C-2] has been set to a D
incoming calls to the multi-line cannot be transferred if the service restriction class of the MY Line
restricts this service feature.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Call Forwarding - Busy Line - D
Intermediate Station
FWD XXXX
(Time Display)
FORWARD XXXX
(Time Display)
term
term
term
's LCD panel may be allowed or denied
Calling/Called Party
XXXX
XXXX
supersedes STATION HUNTING [S-7, 8, 9].
C-2D
term
to
term
MY
term
multi-line,
Page 93