Pushbutton Calling - Attendant Only - NEC NEAX 2400 ICS Features Manual

Hide thumbs Also See for NEAX 2400 ICS:

Table of Contents

Pushbutton Calling - Attendant Only

General Description

This feature permits an Attendant to place all calls over DTMF signaling lines from a pushbutton keypad

on the ATTENDANT CONSOLE [A-3].

Operating Procedure

Attendant presses the pushbutton keypad to dial.

Service Conditions

This feature requires that all Central Office trunks and TIE Trunk terminals accept pushbutton

signaling (DTMF).

PUSHBUTTON CALLING - ATTENDANT ONLY may be added to the system without providing

PUSHBUTTON CALLING [P-4] capability to other stations.

Interactions

The Attendant Console must first be provided.

Pushbutton Calling - Attendant Only

NEAX2400 ICS Business Features and Specifications

NDA-24143, Issue 4