Table of Contents
Advertisement
C-151
Service Conditions (cont'd)
4.
A maximum of 32 digits can be saved. However, when the calling number is received via CCIS
line, this feature is available for the first 16 digits (provided that "1" is assigned to CND: 29 (CI)
of ARTE command).
5.
When a trunk access code (ex. "9") is required for call origination to the saved number, the
access code must be added on a route basis by ACNP and ACND commands. Note that the
assigned access code is not displayed on the D
6.
When the area code is not to be sent to within the same area, the area code must be deleted by
the AFRS, AOPR and AADC commands.
7.
Even if station data is changed by FOLLOW PHONE [F-31] etc., stored number data remains at
the station.
8.
When the system is initialized, stored number data is deleted.
Automatic Saving - LC/ELC
1.
Automatic Saving is available for analog stations allowed this service and the D
Return key.
2.
This service is available when an incoming call is directly terminated to a station.
Automatic Saving - ELC
1.
The Call Return key must be assigned to the D
stored number.
2.
When a received calling number is the same number as last time, the calling number is not
saved.
3.
When the ELC circuit card is initialized, stored number data is deleted.
4.
The calling number is displayed on the D
Accordingly, when My Line of the D
saved.
5.
When a call is terminated to My Line, even if the D
the calling number is saved.
6.
When a call is terminated while one of the stored numbers is displayed, the lower LCD indicates
the calling number and the upper LCD displays the stored number for 5 seconds.
7.
When 3 calling numbers are already stored, if a call is terminated while the oldest number is
displayed, the oldest number is deleted and the received number is saved. Consequently, call
origination cannot be made to the displayed number.
8.
Call origination can be made to the stored number while Dial Tone is heard. After seizing a trunk,
this feature is not available.
9.
When originating a call using this service, the last 16/24 digits are displayed on the D
Automatic Saving - LC
1.
This service is not available when a call is terminated to an ISDN terminal.
term
2.
When the D
number is displayed in place of the stored number.
3.
When ANALOG CALLER ID - STATION [A-127] is effective, if a call is terminated from a station,
the station number is saved.
4.
Even if the LC card is initialized, saved calling number is not deleted.
Manual Saving
1.
Manual Saving is available for the D
2.
When the calling number is saved, "S & R" and the first 12 digits are displayed on the D
Page 188
Call Return
term
user place a call to the stored number by dialing the access code, the dialed
term
term
LCD.
term
which has the LCD in order to check the
term
LCD when a call is terminated to Prime Line.
is not Prime Line, the displayed calling number is not
term
user is in conversation using Sub Line,
with the Save and Repeat key.
NEAX2400 ICS Business Features and Specifications
term
with Call
term
LCD.
term
LCD.
NDA-24143, Issue 4
Advertisement
Table of Contents
