Table of Contents
Advertisement
N-3
N-3
General Description
This feature allows the ATTENDANT CONSOLE [A-3] to place any calling party on hold, dialing the call,
and connecting the calling and called parties.
Operating Procedure
To operate:
1.
The Attendant answers an operator call by pressing the "ANSWER" or "ATND" key.
2.
Press the "START" key.
3.
Dial the exchange network access code.
4.
Dial the desired telephone number.
5.
Press the "RLS" key.
6.
The parties are connected.
Service Conditions
1.
The Attendant may terminate the connection either before or after the called station answers.
2.
There is no AUTOMATIC RECALL [A-8] for station-to-trunk and trunk-to-trunk calls when the
called party does not answer.
3.
If the station is restricted, the Attendant will receive a Reorder Tone when attempting to establish
a Central Office connection.
4.
When the PASSING DIAL TONE [P-2] feature is provided, and the Attendant has accessed an
outgoing trunk, the call may be released from the ATTENDANT CONSOLE [A-3], and the user
is allowed to complete dialing.
5.
This feature allows the Attendant to place an outgoing call for a station user who reached the
Attendant via a dial "0" call without requiring the station user to hang up.
6.
The Attendant can dial the called number for the station user, or using the PASSING DIAL TONE
[P-2] feature, allow the station user to complete the dialing.
Interactions
1.
The Attendant Console can seize the dial tone and dial an outgoing number for any station in the
system. The Attendant Console cannot pass an unrestricted dial tone to any station. See
PASSING DIAL TONE
2.
The Attendant Console must first be provided.
Page 374
Non-delay Operation
Non-delay Operation
[P-2]
for more information.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Advertisement
Table of Contents
