Table of Contents
Advertisement
C-3
Service Conditions (cont'd)
17. SPLIT CALL FORWARDING [S-99]: When a call is forwarded to the parties predesignated by
SPLIT CALL FORWARDING [S-99], service conditions are the same as described in items 12,
13, and 14.
18. When a call is transferred from the Attendant to a station that has set CALL FORWARDING -
DON'T ANSWER, this feature may be restricted or activated according to System Data (Sys 2,
Index 6, Bit 7).
19. If individual Call Forwarding - Don't Answer timer is not given, the default timer assigned by
ASYD command is used.
Interactions
1.
If access codes for CALL FORWARDING-BUSY LINE and CALL FORWARDING-DON'T
ANSWER are the same, only one key needs to be assigned in AKYD.
2.
ACFO is applicable to DID, DIT, and TIE Line calls only.
3.
A noncontrolling UCD station is allowed to activate CALL FORWARDING-DON'T ANSWER.
When this station sets call forwarding, calls directed to this station will be call forwarded. The
member station is not removed from the UCD group under the conditions of the call forwarding
feature used. When it is the station's turn to ring, that call is affected by CALL FORWARDING-
DON'T ANSWER.
4.
CALL FORWARDING-DON'T ANSWER to an Attendant Console will not operate when the
system is in Night mode. If ATTENDANT NIGHT TRANSFER [A-19] is provided, the call is
forwarded to the ATTENDANT NIGHT TRANSFER [A-19] station.
5.
If the CALL FORWARDING-DON'T ANSWER target station is a D
NOT DISTURB [D-21D], call forwarding is not activated.
6.
The CALL FORWARDING-DON'T ANSWER feature is set from Station A to Station B if Station
A is idle and Station B is busy.
7.
When a call is Call Forwarded, the destination station is recorded for STATION MESSAGE
DETAIL RECORDING [S-10].
8.
STATION-TO-STATION CALLING [S-11] must first be provided.
Page 98
Call Forwarding - Don't Answer
term
that has activated DO
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Advertisement
Table of Contents
