Table of Contents
Advertisement
C-2D
Operating Procedure (cont'd)
To cancel CALL FORWARDING - BUSY LINE to a D
1.
Press the multi-line key for which CALL FORWARDING - BUSY LINE - D
cancelled.
2.
Lift the handset or press the "SPKR" key; receive Dial Tone.
3.
Press the "FORWARD-BY" key; receive Service Set Tone. The LED of the associated feature
key will go out on the D
term
D
Series E
4.
Replace the handset or press the "SPKR" key.
Service Conditions
1.
This feature may be set and cancelled by the station user or the Attendant.
2.
CALL FORWARDING - BUSY LINE - D
reinitialized or a power failure occurs.
3.
This feature is assigned to stations through CLASS OF SERVICE - INDIVIDUAL [C-15]
programming in System Data.
4.
There is no limitation to the number of stations that can set CALL FORWARDING - BUSY LINE
[C-2] simultaneously.
5.
CALL FORWARDING - BUSY LINE - D
CALLING - ONE TOUCH [S-22].
Note:
If this feature is accessed via the dial pad, it must be cancelled via the dial pad.
6.
If separate access codes are programmed into System Data for CALL FORWARDING - DON'T
ANSWER [C-3] and CALL FORWARDING - BUSY LINE [C-2], separate feature keys must be
programmed on each D
7.
CALL FORWARDING - BUSY LINE - D
station basis.
8.
Call Forwarding on a tenant basis allows any incoming calls, which encounter a busy condition,
to be forwarded to a predetermined station or the ATTENDANT CONSOLE [A-3].
9.
Individual CALL FORWARDING - BUSY LINE - D
FORWARDING.
Page 92
Call Forwarding - Busy Line - D
term
for which this multi-line is a MY Line. The LCD displays:
FWD CNCL
(Time Display)
FORWARD CANCEL
(Time Display)
term
term
term
to equip it with both features.
term
term
term
multi-line:
data remains programmed, even if the system is
may also be accessed via the dial pad or SPEED
can be provided on a tenant and/or an individual
term
supersedes tenant basis CALL
NEAX2400 ICS Business Features and Specifications
term
feature is to be
NDA-24143, Issue 4
Advertisement
Table of Contents
