Table of Contents
Advertisement
Service Conditions (cont'd)
2.
When the Attendant extends a call to a station that has set CALL FORWARDING - DON'T
ANSWER, the called station will ring for 10 seconds. If after this time, the call has not been
answered, AUTOMATIC RECALL [A-8] is activated. If desired, this timing can be changed
through the VARIABLE TIMING PARAMETERS [V-1] feature.
3.
Stations are assigned this feature according to CLASS OF SERVICE - INDIVIDUAL [C-15]
programming in System Data.
4.
A station programmed for access to CALL FORWARDING - DON'T ANSWER is automatically
allowed CALL FORWARDING - BUSY LINE [C-2, 2D].
5.
There is no limitation to the number of stations that can set the CALL FORWARDING - DON'T
ANSWER simultaneously.
6.
CALL FORWARDING - DON'T ANSWER can be provided on either a tenant or an individual
basis.
7.
Individual CALL FORWARDING - DON'T ANSWER takes precedence over tenant basis Call
Forwarding.
8.
Call Forwarding on a tenant basis allows direct incoming trunk calls that encounter a Don't
Answer condition to be forwarded to a predetermined station or the ATTENDANT CONSOLE [A-
3].
9.
The operator answering a Call Forwarding call can identify the called station number on the
ATTENDANT CONSOLE [A-3] display.
10. CALL FORWARDING - DON'T ANSWER from the Attendant is only activated after pressing the
"RLS" key.
11. If the station's own station number is set for CALL FORWARDING - DON'T ANSWER, then this
feature is changed to CALLING PARTY RECOGNITION SERVICE (CALL FORWARDING -
DON'T ANSWER) [C-103].
12. When the called station does not answer for a predetermined time interval, stations are assigned
this feature according to the TENANT SERVICE [T-12] class of the calling and destination
stations. In the following cases, when the calling station and destination station are restricted by
TENANT SERVICE [T-12] class, this feature is not activated, and the called station continues to
ring:
a.) when the station called is setting CALL FORWARDING - DON'T ANSWER,
b.) when a station holding an original call (station or trunk) on CONSULTATION HOLD
[C-17] places a call to a station setting CALL FORWARDING - DON'T ANSWER.
13. Call Transfer - Attendant (Trunk): Trunk calls transferred by the Attendant are assigned this
feature when the called station does not answer for a predetermined time interval according to
Route Restriction Class of the trunk and the destination stations. When restricted by Route
Restriction Class, this feature is not activated, and the called station continues to ring.
14. Call Transfer - Attendant (Station): Station calls transferred by the Attendant are assigned this
feature when the called station does not answer for a predetermined time interval according to
TENANT SERVICE [T-12] class of the originating and destination stations. When restricted by
Tenant Service class, this feature is not activated, and the called station continues to ring.
15. Speed Calling List numbers may be programmed as the destination telephone number. This
permits the sent digits to exceed the 12-digit maximum.
16. CALL FORWARDING - DON'T ANSWER data remains in the data memory, even if the system
or LP is reinitialized.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Call Forwarding - Don't Answer
C-3
Page 97
Advertisement
Table of Contents
