Table of Contents
Advertisement
Service Conditions (cont'd)
term
D
Series E
12. Stations are assigned this feature according to TENANT SERVICE [T-12] of the calling and
destination stations, when the called station does not answer for a predetermined time interval.
In the following cases, when the calling or destination stations are restricted by TENANT
SERVICE [T-12] class, this feature is not activated, and the called station continues to ring:
a.) when a station places a call to another station setting CALL FORWARDING - DON'T
ANSWER,
b.) when a station holding an original call (station or trunk) on CONSULTATION HOLD
[C-17] places a call to a station setting CALL FORWARDING - DON'T ANSWER.
13. Call Transfer - Attendant (Trunk): Trunk calls transferred by the Attendant are assigned this
feature according to Route Restriction Class of the trunk and the destination station when the
station does not answer for a predetermined time interval. When restricted by Route Restriction
Class, this feature is not activated, and the called station continues to ring.
14. Call Transfer - Attendant (Station): Station calls transferred by the Attendant are assigned this
feature according to TENANT SERVICE [T-12] class of the originating and destination stations
when the called station does not answer for a predetermined time interval. When restricted by
TENANT SERVICE class, this feature is not activated, and the called station continues to ring.
15. Speed Calling List numbers may be programmed as the destination telephone number. This
permits the sent digits to exceed the 12-digit maximum.
16. CALL FORWARDING - DON'T ANSWER data remains in the data memory, even if the system
or LP is reinitialized.
17. When a call is transferred from the Attendant to a station that has set CALL FORWARDING -
DON'T ANSWER, this feature may be restricted or activated according to System Data (SYS2,
INDEX6, BIT7).
Interactions
1.
If access code for CALL FORWARDING-BUSY LINE [C-2] and CALL FORWARDING-DON'T
term
ANSWER-D
2.
ACFO is applicable to DID, DIT, and TIE Line calls only.
3.
A noncontrolling UCD station is allowed to activate CALL FORWARDING-DON'T ANSWER-
term
D
. When this station sets Call Forwarding, calls directed to this station will be call forwarded.
The member station is not removed from the UCD group under the conditions of which the Call
Forwarding feature is used. When it is the station's turn to ring, that call is affected by CALL
FORWARDING-DON'T ANSWER - D
4.
CALL FORWARDING-DON'T ANSWER-D
the system is in Night mode. If ATTENDANT NIGHT TRANSFER [A-19] is provided, the call is
forwarded to the ATTENDANT NIGHT TRANSFER [A-19] station.
5.
If the CALL FORWARDING-DON'T ANSWER-D
DISTURB [D-21D] has been set, Call Forwarding is not activated. The station will ring, and the
timer setting in System Data 1, Index 145 is ignored.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Call Forwarding - Don't Answer - D
CF NANS XXXX
(Time Display)
are the same, only one key needs to be assigned in AKYD.
term
term
XXXX
.
term
to an Attendant Console will not operate when
term
target station is a D
C-3D
term
and DO NOT
Page 103
Advertisement
Table of Contents
