NEC NEAX 2400 ICS Features Manual page 266

Hide thumbs Also See for NEAX 2400 ICS:
Table of Contents

Advertisement

E-1
Service Conditions (cont'd)
VOICE CALL - D
Data Call through a Data Adapter
Data Call through a Data Module
Note:
In any of the above instances, the calling station will receive Reorder Tone.
4.
If one party disconnects after the three-way conference bridge is established, the remaining two
parties will still be connected.
5.
The EXECUTIVE RIGHT-OF-WAY access code may be assigned according to customer
preference.
6.
The maximum number of simultaneous Executive Overrides allowable is dependent on the
number of conference function trunks in the system. (Conference function is included in TSW
and MUX circuit cards.)
7.
This feature can be denied on DICTATION ACCESS [D-3] and PAGING ACCESS [P-1, 28]
connections through programming in System Data.
8.
If the called station has activated CALL FORWARDING - ALL CALLS [C-5] or - BUSY LINE
[C-2] and the forwarded-to station is busy, the EXECUTIVE RIGHT-OF-WAY call will bridge into
the forwarded-to station.
9.
If the called station line has a party on CALL HOLD [C-6], override is not allowed to the called
station line, and Reorder Tone is provided. Terminating override calls are denied when the called
party has another party in a CONSULTATION HOLD [C-17] condition.
10. If the called station is maintenance busy and EXECUTIVE RIGHT-OF-WAY is invoked, override
is denied and Reorder Tone is returned to the calling station.
11. It is possible, via System Data, to disable the sending of a warning tone during an EXECUTIVE
RIGHT-OF-WAY connection. Normally the two burst warning tone is sent when the connection
is initiated.
Page 236
Executive Right-of-Way
term
[V-2, V-7]
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4

Advertisement

Table of Contents
loading

Table of Contents