Table of Contents
Advertisement
S-3D
General Description
This feature allows a D
(abbreviated call codes) than would normally be required.
Operating Procedure
Originating a call from a D
1.
Press the SPEED CALLING-SYSTEM (SPEED-SYS) key.
2.
Dial the abbreviated call code (two or three digits). The LCD displays:
term
D
Series E
3.
The call is completed.
term
4.
If the D
does not have the SPEED-SYS key, dial the SPEED CALLING-SYSTEM access
code, then the abbreviated call code.
To operate from a SPEED CALLING-ONE TOUCH key:
1.
Press an FNC key, then a "one touch-speed calling" key. The LCD displays previously stored
digits.
2.
Dial the SPEED CALLING-SYSTEM access code and the abbreviated call code.
3.
Press the FNC key. The LCD displays:
term
D
Series E
4.
To access, press the SPEED CALLING-ONE TOUCH D
Service Conditions
1.
SPEED CALLING-SYSTEM [S-3] codes programmed into System Data are accessible to all
stations with a CLASS OF SERVICE-INDIVIDUAL [C-15] permitting speed calling.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Speed Calling - System - D
Speed Calling - System - D
term
station user to call certain frequently dialed numbers using fewer digits
term
:
(Time Display)
Abbreviated Call Code
(Time Display)
Abbreviated Call Code
SPD SET
(Time Display)
SPEED SET
(Time Display)
term
term
XXX
XXX
term
[S-26D] key.
S-3D
Page 451
Advertisement
Table of Contents
