Table of Contents
Advertisement
S-10
Service Conditions (cont'd)
31. Additional hardware is required.
RS-232C
Interactions
1.
If LCR (S) is provided, the LCR (S) access code is listed in ARNP. If an outgoing route is not
used in LCR (S), then list the OGCA access code in ARNP.
2.
To test SMDR output, it is recommended that a serial printer or breakout box be used to
determine if the system is sending data.
3.
CALL TRANSFER-ALL CALLS [C-11]: Either the first station, last station, or split billing is
allowed with SMDR. Split billing provides a separate call record for both before and after a call
transfer.
4.
ATTENDANT CAMP-ON WITH TONE INDICATION [A-1]: The called station number is recorded
for incoming C.O. calls via the Attendant Console (RRI 2 of ARSC). To record the time a
destination station is on a call, split billing or last station billing is required. With split billing, the
time the Attendant Console is on the call is separated from the time the destination station is on
the call. For last station billing, the destination station is charged with the entire time of
connection.
5.
LEAST-COST ROUTING-3/6-DIGIT [L-5]: SMDR will record the digits sent rather than the digits
dialed.
6.
The destination station is recorded on SMDR for the following features:
CALL FORWARDING
CALL PICKUP
7.
CALL FORWARDING-INTERCEPT [C-25]: An incoming trunk call responds to Call Forwarding-
Intercept to the Attendant Console. SMDR records the call as if it is a direct call to the Attendant
Console.
Page 466
Station Message Detail Recording (SMDR)
SMDR Terminal
To SMDR Port
[C-2, 3, 5]
[C-7, 30]
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Advertisement
Table of Contents
