Table of Contents
Advertisement
T-28
T-28
Trunk-to-Trunk Third-Party Cancellation
General Description
This feature allows a station to cancel an active trunk-to-trunk connection (during a three-way-connection)
and return to the original call.
Operating Procedure
If a station is presently engaged in a call with another station or with a trunk party:
1.
Switchhook flash; receive Special Dial Tone.
2.
Dial a trunk access code and the number for the desired third party; the called party is rung.
3.
Switchhook flash to establish a three-way connection.
4.
Switchhook flash to release the trunk; the station returns to the original call.
Service Conditions
1.
The third party that can be canceled by this feature is an outgoing trunk seized by an outgoing
access from CONSULTATION HOLD-ALL CALLS [C-17].
2.
If a Broker's Call has been activated by a D
a.) In the case of CONSULTATION HOLD-ALL CALLS [C-17] outgoing (station hold), the
third party can be cancelled as follows: Engaged in station-to-station call
Way Connection
b.) The third party cannot be cancelled by the following sequence: Engaged in station-to-
trunk call
c.) This restriction does not apply to CONSULTATION HOLD-ALL CALLS [C-17] outgoing
(trunk hold).
Page 526
Trunk-to-Trunk Third-Party Cancellation
Switchhook.
Three-Way Connection
term
, the following restrictions apply:
Switchhook.
NEAX2400 ICS Business Features and Specifications
Three-
NDA-24143, Issue 4
Advertisement
Table of Contents
